Custom Stainless Enclosures Provides 4Xxtreme® Electrical Enclosures with the Lowest Cost of Ownership

November 5, 2023

Custom Stainless Enclosures Provides 4Xxtreme® Electrical Enclosures 

with the Lowest Cost of Ownership 

Double seal technology protects sensitive electronics from the harshest washdown environments

Woodbury, MN Custom Stainless Enclosures, Inc. announces their 4Xxtreme® electrical enclosures will reduce your overall cost of ownership of equipment, when installed in the harshest washdown environments. Custom Stainless Enclosures technology features the following cost of ownership saving advantages:

 

Double Seal Enclosure Technology                                                                                                 

Custom Stainless Enclosures Patented Double Seal™ Enclosure technology increases their enclosure’s ability to withstand the harshest environments. Gasket Failure is the number one issue when it comes to water getting into enclosures. The problem is, by the time a user realizes they have a problem, the damage has already been done. Most enclosure manufacturers use a “Pour in Place” or “Foam in Place” (FIP) gasket system which can have a temperature rating as low as 140℉ (60℃). The “FIP” gasket is the least expensive gasket system an enclosure manufacturer can use. In harsh wash-down environments this can lead to gasket failure within as little as six months, the harsher the environment the faster these “FIP” gaskets start to crack, absorb water and fall off.

Easy to maintain “Push On” field replaceable gasket system                                           

Custom Stainless Enclosures easy-to-use field replaceable “Push On” gasket system is the simplest gasket replacement system in the industry. Custom Stainless Enclosures standardized on a Blue EPDM gasket, however, also available are Nitrile and Blue Silicone gaskets depending on our customers installation requirements.      

 

Single Hygienic Quarter Turn or Defeater Handle for Each Enclosure Manufactured     

The second issue for water getting into an enclosure is users typically do not close all the quarter turns. To solve this problem, Custom Stainless Enclosures now manufactures all their enclosures with a single Hygienic Quarter Turn or 3-Point Defeater Handle.  

Custom Stainless Enclosures received the Innovation Award at the Process Expo in 2021 for this simple effective design concept.

Double Stud® Mounting Technology                                                                                    

Custom Stainless Enclosures developed their Patented “Double Stud®” technology for two reasons. The first was to eliminate any water coming in through the mounting system.                                       

 The second reason was to have a dual-purpose mounting system that provides a mounting means for mounting the back panel on the inside of the enclosure while also creating a way to mount the enclosure from the outside, reducing the time it takes to install the enclosure in the field.

 

Limitless Enclosure Design Capabilities: “Building Your Enclosure Your Way!”             

Each enclosure Custom Stainless Enclosures builds starts from one of their Super Models. Next, Custom Stainless Enclosures builds out their customers enclosure to their exact dimensions and requirements. With over seven top configuration’s Custom Stainless Enclosures exceeds customer expectations with cutouts provided at no additional charge and, more importantly, Custom Stainless Enclosures does not overcharge for customized enclosures.  Unlike their competition when it comes to IP69K electrical enclosures, Custom Stainless Enclosures has no limits on size or capabilities. Custom Stainless Enclosures can supply their enclosures with flanges for disconnects, multi-door enclosures, IP69K rated windows, rotary unions and more.

 

To learn more about the 4Xxtreme single hygienic quarter turn design visit https://4xxtreme.com.

 

About Custom Stainless Enclosures

Custom Stainless Enclosures, Inc. is an innovative leading manufacturer of electrical enclosures for the meat & poultry, dairy, food processing, pharmaceutical, among others. Custom Stainless Enclosures is the proud manufacturer of 4Xxtreme® Enclosures – the newest innovation in the electrical enclosure industry. For the past ten years, Custom Stainless Enclosures has dedicated its time, knowledge, and effort to developing a revolutionary product that will change the way the industry views electrical enclosures.

Visit https://4xxtreme.com/  or call (651) 500-3650 for additional information.